Identifies satellites. Easy to use. Light weight - only 338g!
This meter is ideal for installers as it identifies the satellite, set up time is usually under two minutes.
Please don't mix this meter up with others you may find on the Internet which look similar. They are built to a high standard and thoroughly tested to ensure longevity in the field.
Pre loaded with 100 satellites including Astra 2 for Sky or freesat, Astra 1,Hotbird (13E), Thor (1W), Hispasat (30W) and many others. Indeed all of the satellites we can see in our sky with a reasonable sized dish are included. If there are changes in the future, satellites can be added or edited using the keypad.
To use the meter,you switch on using a proper on-off switch (so no battery drain while off) then select "Installation", then "Dish setting".
Select 28.2E Astra 2. At the bottom of the screen are the signal strength and signal quality meters and a large quality LED display. It could not be easier.
After the first use, the meter defaults to the last satellite chosen and so if it is only going to be used for (e.g.) Astra 2 for Sky or freesat, selecting the satellite is not required as it is already there.
All you have to do is turn on the meter, press OK twice and it is ready to use.
DVB-S and DVB-S2 (SD and HD). Strength, quality, BER and PWR. Audio indication of signal lock. Supports DiSEqC 1.0 and 1.1 and 22KHz tone. LNB short circuit protected.
UK power supply / charger 12/18V 300mA. 7.5V 800mA battery. Shock protecting yellow cover. USB port - software upgradeable. Integrated compass, Integrated torch. Cary strap and USB lead included.